RE: CPU Usage % on 2-Node RAC Run versus Single Node RAC Run .... Benchmarking

  • From: VIVEK_SHARMA <VIVEK_SHARMA@xxxxxxxxxxx>
  • To: "oracle-l@xxxxxxxxxxxxx" <oracle-l@xxxxxxxxxxxxx>
  • Date: Wed, 26 Sep 2007 18:11:05 +0530

Folks

CASE 1 - When Executing a FULL Set of Transactions on Node 1, with the 2nd 
Node's RAC instance in SHUTDOWN Condition
CPU Usage of Node 1-ASMDBR1 = 20 %
CPU Usage of Node 2-ASMDBR2 = 0 %


CASE 2 - When Executing a FULL Set of Transactions on Node 1(ASMDBR1 instance), 
with the 2nd Node's RAC instance ASMDBR2 Simply UP & NO Application 
transactions Fired to it

CPU Usage of Node 1-ASMDBR1 = 20 %
CPU Usage of Unused Node 2-ASMDBR2 = 26 %

ASMDBR2 - UNUSED Node:-
Qs How can the following Waits be Reduced?

Top 5 Timed Events                                                    Avg %Total
~~~~~~~~~~~~~~~~~~                                                   wait   Call
Event                                            Waits    Time (s)   (ms)   Time
----------------------------------------- ------------ ----------- ------ ------
CPU time                                                         2          29.3
control file sequential read                     1,746           2      1   23.8
reliable message                                     5           1    269   20.8
control file parallel write                        104           0      3    5.3
name-service call wait                               3           0     96    4.4
          -------------------------------------------------------------

CASE 3 - When Executing approx Half the above Number of Transactions on Node 1, 
& the Other Half on Node 2 (by setting LOAD_BALANCE = yes in tnsnames.ora)
CPU Usage of Node 1 = 18 %
CPU Usage of Node 2 = 19 %

Will Share Statspack Reports, if asked for.

Cheers & Thanks

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are 
not to copy, disclose, or distribute this e-mail or its contents to any other 
person and any such actions are unlawful. This e-mail may contain viruses. 
Infosys has taken every reasonable precaution to minimize this risk, but is not 
liable for any damage you may sustain as a result of any virus in this e-mail. 
You should carry out your own virus checks before opening the e-mail or 
attachment. Infosys reserves the right to monitor and review the content of all 
messages sent to or from this e-mail address. Messages sent to or from this 
e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***

Other related posts: