[opendtv] Re: F-Type Connectors Now used past 2GHz What Standard?
- From: Cliff Benham <cbenham@xxxxxxxxxxx>
- To: opendtv@xxxxxxxxxxxxx
- Date: Sun, 13 Feb 2005 12:11:16 -0500
Our entire RF system is wired with RG-11 which uses male F connectors
with an
"integral inner pin". The center conductor of RG-11 is far too large
to use as a center pin directly.
And, yes there is co-ax with twisted center conductor. This is
done to increase the surface area of the center conductor to help
reduce the losses caused by "skin effect" at very high RF frequencies.
Donald Koeleman wrote:
>I have yet to see an F-Type male connector with an "integral inner pin",
>regardless of its diameter. Unless you are refering to male connectors
>directly fitted onton filters and so on? Don't think anyone has been foolish
>enough to try using cable withouth a solid core (is there any coax with a
>braided core?).
>
>
>
>
----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:
- Using the UNSUBSCRIBE command in your user configuration settings at
FreeLists.org
- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word
unsubscribe in the subject line.
Other related posts:
