[nas-2000] Re: HDD is not working anymore

  • From: "Remco" <skelter.skelter@xxxxxxxxx>
  • To: <nas-2000@xxxxxxxxxxxxx>
  • Date: Sun, 19 Aug 2007 10:39:26 -0400

Thanks for your reply. I know it was a dumb question, but I was hoping for a simple (no dead HDD) solution. I managed to do some voltage-testing (with a light) and it turns out the HDD is getting power (5v and 12v), so I think it is dead. :(

I will go out to get a new one today to see if that works.

----- Original Message ----- From: <flipstar@xxxxxxx>
To: <nas-2000@xxxxxxxxxxxxx>
Sent: Friday, August 17, 2007 5:26 PM
Subject: [nas-2000] Re: HDD is not working anymore

Hi Remco,

do you own a 2nd harddisk?
or try to start the nas without a disk and check if you can access the
web interface.
Everything else would be guessing.


Remco schrieb:
My problem is not related to tinky, but I do hope someone can try to
help me out...

The HDD in my NAS2000 does start spinning anymore.
The light on the power supply is on, the power light on the NAS is on.
When I press the power button, the power light dims and the NAS light is
also very low and nothing happens, no HDD activity (does not even start
spinning). I somehow got into the web interface earlier (which was on instead of .250, I tried to get into it later but failed)
and it said "no harddisk found". Same thing in USB-more; no HDD activity.

Unfortunately, I just moved so no desktop computer to try the HDD and no
voltage meter to see if the power adaptor is still working or if the HDD
gets power...

Can you think of anything I could try?

Other related posts: