Eric D was right about Terry's Tech Service - I use a GnNet router from him and have 4 Macs networked plus a PC laptop that I just plug in and out as required PLUS the Gnet comes with a parallel print server port which has allowed faster connection to my networked printer! Ken Davis wrote: > I want to share my high-speed internet access among several Macintosh > computers, one of which is to be a web server. > > I'm told I need a router and a hub (Linksys, which I've discovered is > not Mac user-friendly, was suggested). Can anyone recommend a more > suitable router? > > Users can subscribe to the List by sending an email to > <muglo-request@xxxxxxxxxxxxx> with 'subscribe' in the Subject field > > Users can unsubscribe from the List by sending an email to > <muglo-request@xxxxxxxxxxxxx> with 'unsubscribe' in the Subject field > > Users must send messages or replies to <muglo@xxxxxxxxxxxxx> > > All messages are archived so that you can view them at any time by > going to <//www.freelists.org/archives/muglo> > > Problems concerning use of the FreeList should be sent to > <paulthomas@xxxxxxx> > > Don't forget to periodically check our web site at: > > http://muglo.on.ca/ Users can subscribe to the List by sending an email to <muglo-request@xxxxxxxxxxxxx> with 'subscribe' in the Subject field Users can unsubscribe from the List by sending an email to <muglo-request@xxxxxxxxxxxxx> with 'unsubscribe' in the Subject field Users must send messages or replies to <muglo@xxxxxxxxxxxxx> All messages are archived so that you can view them at any time by going to <//www.freelists.org/archives/muglo> Problems concerning use of the FreeList should be sent to <paulthomas@xxxxxxx> Don't forget to periodically check our web site at: http://muglo.on.ca/