[modeleng] Re: Square pistons
- From: "Jeff D" <jeffdayman@xxxxxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Mon, 10 Dec 2007 18:44:45 +0000
count me in for pix Jesse, thanks Jeff Dayman
>From: "Jesse Livingston" <fernj1@xxxxxxxxxxxxx>
>Reply-To: modeleng@xxxxxxxxxxxxx
>To: <modeleng@xxxxxxxxxxxxx>
>Subject: [modeleng] Re: Square pistons
>Date: Mon, 10 Dec 2007 10:53:28 -0600
>
>Al,
>
>Under direct email I am sending you some pictures of a Dake so you can see
>exactly what we are talking about. The piston did not reciprocate back and
>forth like in a regular steam engine. Instead, it wobbled about inside a
>flat box. Anyone else interested in what the Dake, and probably other
>square piston engines looked like inside, just send me your email addy and
>I
>will send you the pictures also.
>
>Jesse the crazed Troy, TN machinist where the temp is 45° right now.
>
> Please permit me a dumb question: WHY? Would not a
> square piston and cylinder be much more difficult to
> seal?
>
> Al, the puzzled one in Mid-Tenn where it is 64 F.
> right now.
>
>MODEL ENGINEERING DISCUSSION LIST.
>
>To UNSUBSCRIBE from this list, send a blank email to,
>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>line.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
