[modeleng] Re: Model Engineering Course
- From: "Dave Beaman" <davebeaman@xxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Fri, 9 Sep 2005 00:20:57 +0100
I wish I could, am tearing out hair with frustration!!!!!
----- Original Message -----
From: <Donkitson1@xxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Thursday, September 08, 2005 5:52 PM
Subject: [modeleng] Re: Model Engineering Course
In a message dated 04/09/2005 00:52:31 , al_messer@xxxxxxxxx writes:
O.K., youse blokes that live close enough to attend,
jump on it! Things like this only come along once
every Blue Moon!
Al Messer,
--- alan Stepney <alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
wrote:
> I just spotted this on the miniature railway list.
>
>
=========================================================
>
> I know that courses like these are rarer than hen's
> teeth these days but
> there is one at Oxford and Cherwell College, Oxford
> Campus starting on the
> 10th September.
>
> I stumbled across the course by chance and I have
> just enrolled. However I
> am no 3 and they need 8 or it won't go ahead!
>
> So if you fancy the course or know someone who would
> please make contact. It
> would be a shame to lose out.
>
> http://www.occ.ac.uk/search.asp
>
> will take you to the college site , then just search
> "Engineering"
>
> =========================================
>
> Alan Stepney
>
> http://www.alanstepney.info
> Model Engineering & steam engine information pages
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email
> to,
> modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject line.
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
Hi every one,
Just got back from a short break ( a week in Southport) The College at
Accrington in Lancashire also runs a model engineering course this starts
in
about 10 days time and is held on Wednesday afternoons between 1.00pm and
4-30pm the cost is/was £40.00 per ten weeks and for that you get the use of
all
the big machinery ie Vertical and Horizontal Millers lathes, shapers,
drills
etc etc. and if the material is in stock that is also provided foc as well.
Of course there is a competent instructor and technician on hand to give
instruction/help where required. For further information contact the
college on
01254 354354 I can highly recommend this as I have been a member there for
the
past 3 years.
Spaces are in demand so an early contact would be to your advantage.
BTW Whilst staying on the Caravan Club site at Southport I visited the
Southport Model Engineering Society just a 3 minutes walk from the site and
in
Victoria Park, they have an excellent 3.5 and 5 inch gauge track there that
has just been extended and I found them to be very welcoming. If you get up
there pay them a visit.
Don
Nelson Lancashire
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
