[modeleng] Re: Batam Cock Boiler
- From: "Richard Atkins" <red.barron3@xxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Mon, 11 Dec 2006 17:27:06 -0000
Hi Harry.
I have drawings and text for LBSC's Bantam Cock. The original was
serialised in Mechanics mag Jan 1945 to 46. The threads for the safety
valves is shown as 3/8 times 26tpi and regulator bush is 1/2 times 32tpi.
Hope this of some help.
Regards
Richard.
Hartlepool.
England.
----- Original Message -----
From: "Harry Wade" <hww@xxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, December 11, 2006 3:18 PM
Subject: [modeleng] Batam Cock Boiler
> Has anyone the drawings, or a reference to the ME articles (if there were
> any), for Bantam Cock? I've been asked to provide a hydro test on one and
> need to know the threads of the bushings available in the upper reaches of
> the boiler. (The test boiler is not yet at hand.)
>
>
> Regards,
> Harry Wade
> Nashville Tennessee
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date:
> 09/12/2006 15:41
>
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
