Harry, whenever you are able, I'd surely like to see a photo of it. Al Messer --- Harry Wade <hww@xxxxxxxx> wrote: > At 05:27 PM 12/11/06 -0000, you wrote: > >Harry, I have drawings and text for LBSC's Bantam > Cock. The original was > >serialised in Mechanics mag Jan 1945 to 46. The > threads for the safety > >valves is shown as 3/8 times 26tpi and regulator > bush is 1/2 times 32tpi. > >Hope this of some help. - Regards > > Richard (and R.L.) > Exactly what I needed to know. Thanks very much. > One of your > countrymen who managed to escape has turned up over > here with a Bantam Cock > under his coat which he now wishes to run. Of > course in general we don't > bother ourselve too much about testing the smaller > gauges but he says > he''ll feel much better about the whole thing if it > has a hydro-test which > he wishes me to perform and I've gladly agreed to do > it. > > > Regards, > Harry Wade > Nashville Tennessee > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email > to, > modeleng-request@xxxxxxxxxxxxx with the word > "unsubscribe" in the subject line. > ____________________________________________________________________________________ Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.