Correct Charuji, This thread was planned back before 2 days, for benefit of all... others are also requested to share their building experience. & availability of components in VU-Land... VU2SWX U have one extra set of PCB U can gift it to -YC1DCN -Indonesia. He is very much willing... we'll discuss abt that, & a drill-vise + 12 V DC motor, late night, today... (mailefd 4rm mobile) On 03/03/2014, Charudatt Uplap <charudattu@xxxxxxxxx> wrote: > Good observation... keep it coming, > > > > Request with other builders, please share as many pics as you can for the > benefit of other hams. > > > > As PICs are speak a thousand words. > > > > Regards > > Charudatt - vu2upx > > > > From: minima-bounce@xxxxxxxxxxxxx [mailto:minima-bounce@xxxxxxxxxxxxx] On > Behalf Of Sunil Thomas Thonikuzhiyil > Sent: Monday, March 03, 2014 12:00 PM > To: minima@xxxxxxxxxxxxx > Subject: [minima] PCB build progressing. > > > > Hi list, > > I have completed audio, mic , BFO and Bidirectional sections on > the > PCB sent by Sandeep. Here are some observations. > > 1) All Resistors are of 1/8 watt foot print. (I may not be easily > available in many places). My build has become ugly looking as I have only > 1/4 stuff. > > 2) The audio and mic sections are too crowded. It may be difficult to > troubleshoot. > > > ( They worked fine for me :)) > > 3) The relays are still elusive. May be we should change to bigger > relays or switch to some other switching schemes. > > 4) The space provided for 3uH inductor in BFO section is small. > > 5) Provide some more space around the mixer coils so that we can try > different cores like FT37-43 or Pig nose. > > 6) Provide vcc and ground points near points which connect to digital > board. This will enable easy testing of the main board even with out > digital board, You can wire up a couple of switches and test. > > > 7) I prefer some more extra test holes near the filters. Also make > the > board little more bigger. > > > > I am attaching a couple of photos of my build. > > > > 73s > > Sunil VU2SWX > > > -- > > > -- http://www.lohiaelectronics.com/sandeep/mimima.htm