Yes it is, Thanks, Wayne > On Feb 21, 2014, at 8:42 PM, Goody K3NG <goody.k3ng@xxxxxxxxx> wrote: > > Nice. Is this a QFN package Si570? > > >> On Fri, Feb 21, 2014 at 2:01 PM, Wayne McFee <nb6m@xxxxxxx> wrote: >> Hello all, >> >> I used an 8 pin DIP socket as a jig to hold leads cut from 1n914s which I >> inserted, shaped, cut and soldered to the appropriate pads of the si570 one >> at a time. >> >> Since I am building the control module on perfboard, I now have the choice >> of either removing the soldered assembly from the socket and plugging it >> into an 8 pin DIP socket on the board, or solder the individual wires in >> place, using a clamp type heat sink on each wire as it is being soldered so >> it doesn't become unsoldered from the chip. >> >> >> >> >> >> 73, >> >> Wayne NB6M >> >> >