[macvoiceover] Re: i-braille and Voiceover.
- From: ashley <ash.cox@xxxxxxxxxxxx>
- To: macvoiceover@xxxxxxxxxxxxx
- Date: Tue, 5 Jan 2010 17:28:09 +0000
Hi,
I also have an index basic D. It's connected to the lan. Does anybody know how
to set this up so that ibraille can send to it? i know the ip address of the
embosser.
thanks,
ash
On 5 Jan 2010, at 17:17, Keith Reedy wrote:
> Mary, John and every one,
>
> I am using iBraille with an Index Basic-d and it works with SnowLeopard. It
> only works with Index embossers, but, it works fine for english.
>
> The manual was some help and I have some notes, [they are very crude, they
> were written for me], but, they may be a help to you.
>
> Keith Reedy
> On Jan 2, 2010, at 11:47 PM, John Panarese wrote:
>
>> Hi Mary,
>> Unfortunately, iBraille has not been updated in quite some time, and last
>> I heard, they were not working on it. It is, however, usable, though it
>> takes some fiddling to get used to it. Perhaps Keith can also add some
>> insight.
>>
>> Take Care
>>
>> John D. Panarese
>> Managing Director
>> Technologies for the Visually Impaired, Inc.
>> 9 Nolan Court
>> Hauppauge, NY 11788
>> Tel/Fax, (631) 724-4479
>> Email, tvii@xxxxxxxxxxxxx
>> Internet, http://www.tvi-web.com
>>
>> AUTHORIZED DISTRIBUTORS FOR PORTSET SYSTEMS LTD, COMPSOLUTIONS VA, PREMIER
>> ASSISTIVE TECHNOLOGIES, INDEX, PAPENMEIER, REPRO-TRONICS, DUXBURY, SEROTEK
>> AND OTHER PRODUCTS FOR THE BLIND AND VISUALLY IMPAIRED
>>
>> AUTHORIZED APPLE STORE BUSINESS AFFILIATE
>> MAC VOICEOVER TRAINING AND SUPPORT
>>
>> On Jan 2, 2010, at 5:52 PM, Mary Otten wrote:
>>
>>> Hi folks,
>>> Has anybody on the list got experience with the i-braille application
>>> for use with index embossers on the Mac? I have been to the Index site
>>> and seen a manual that is at least 3 years out of date. My state-side
>>> dealer, sighted electronics, is apparently out of business, so I don't
>>> know who sells these embossers in the U.S., nor whether they'd have
>>> anything a bit more user friendly than the Index site in Sweden. I use
>>> the embosser in Windows with the winbraille utility that was free with
>>> the embosser, and would like to try getting it set up with the Mac, but
>>> could use some tips along the way.
>>>
>>> Mary
>>>
>>>>
>>>> Click on the link below to go to our homepage.
>>>> http://www.icanworkthisthing.com
>>>>
>>>> Manage your subscription by using the web interface on the link below.
>>>> //www.freelists.org/list/macvoiceover
>>>>
>>>> Users can subscribe to this list by sending email to
>>>> macvoiceover-request@xxxxxxxxxxxxx
>>>> with 'subscribe' in the Subject field OR by logging into the Web
>>>> interface at //www.freelists.org/list/macvoiceover
>>>>
>>
>>>
>>> Click on the link below to go to our homepage.
>>> http://www.icanworkthisthing.com
>>>
>>> Manage your subscription by using the web interface on the link below.
>>> //www.freelists.org/list/macvoiceover
>>>
>>> Users can subscribe to this list by sending email to
>>> macvoiceover-request@xxxxxxxxxxxxx
>>> with 'subscribe' in the Subject field OR by logging into the Web
>>> interface at //www.freelists.org/list/macvoiceover
>>>
>
>>
>> Click on the link below to go to our homepage.
>> http://www.icanworkthisthing.com
>>
>> Manage your subscription by using the web interface on the link below.
>> //www.freelists.org/list/macvoiceover
>>
>> Users can subscribe to this list by sending email to
>> macvoiceover-request@xxxxxxxxxxxxx
>> with 'subscribe' in the Subject field OR by logging into the Web
>> interface at //www.freelists.org/list/macvoiceover
>>
personal website:
www.ashleycox.co.uk
>
> Click on the link below to go to our homepage.
> http://www.icanworkthisthing.com
>
> Manage your subscription by using the web interface on the link below.
> //www.freelists.org/list/macvoiceover
>
> Users can subscribe to this list by sending email to
> macvoiceover-request@xxxxxxxxxxxxx
> with 'subscribe' in the Subject field OR by logging into the Web
> interface at //www.freelists.org/list/macvoiceover
>
Other related posts:
