Howdy... I see that you have partly found how to get the Bank Select work (this last message of yours is three hours newer, hihi...) Bank Select = ENA is set on the General page on your module: First press Multi, then press Multi again (somethingy starts blinking), Now you are in Global mode. On page 3D (or something) tis setting is possible.... It helps to study the manual you know. There is a lotta things to know 'bout your module Cheers, Thomas On 19 Jan 2002 at 16:45, Butch wrote: > How do I set bank select to "ena" on my X5DR, were it will receive, bank > change 7425 to disable my Drums > > ---------------------------------------------------------------- > This message was sent through the Korgy Park mailing list. > Mailing list info page: //www.freelists.org/list/korgypark. > -- Thomas Anderssen Jakobstad Energy Utility (www.jpenergy.net) Victor Schaumansesplanaden 1 FIN-68600 JAKOBSTAD, Finland ---------------------------------------------------------------- This message was sent through the Korgy Park mailing list. Mailing list info page: //www.freelists.org/list/korgypark.