Re: running JAWS 6.0 as a service in windows xp home
- From: "Gene" <guystevens@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sun, 5 Jun 2005 13:52:02 -0400
As a test I just auto started Jaws and I have the same thing. I still have
some vision so I can see that Jaws is one of the last things loaded. But
normally I don't start Jaws till everything else is loaded anyway because if
I do it uses the wrong sound card.
Thanks; Gene
On MSN and Yahoo - guystevens@xxxxxxxxxxxxx
----- Original Message -----
From: "Chris Skarstad" <toonhead5@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Sunday, June 05, 2005 1:14 PM
Subject: Re: running JAWS 6.0 as a service in windows xp home
> Hi guys
> Again there appears to be some confusion on this issue so let me further
> explain. As previously stated, or maybe I didn't so let me do it now, I
> have the automatically start JAWS check box checked under options/basic
> settings.
> I also have the run jaws from system tray check box checked in that very
> same dialogue.
> If, for example, I've had to unload JAWS with insert plus f4 to play a
> game
> it unloads fine, and when I restart it, it starts up very quickly. What
> seems to take forever on my system is that *initial* startup of JAWS. In
> other words, when my computer is booting up, JAWS appears to not start as
> quickly as it did in previous versions. I first hear the windows xp
> startup sound, and then it could be anywhere from 15 to 30 seconds before
> JAWS speaks the good old, "JAWS For Windows is ready" message. In previous
> versions such as 5.0 and 5.01 and even before that, it didn't seem to take
> as long for JAWS to load and start speaking as it does now. From what
> I've
> been told, if you have automatically start jaws checked, which I do, then
> JAWS is run as a service. I guess there's not a lot I can do, other than
> to possibly take a few other programs out of startup and see if that
> solves it.
> I hope i've explained things so everyone understands.
>
>
>
>
>
>
>
> At 09:08 PM 6/4/2005, you wrote:
>>It may also help that I don't automatically load at startup.
>>
>>
>>
>>Thanks; Gene
>>
>>On MSN and Yahoo - guystevens@xxxxxxxxxxxxx
>>
>>
>>----- Original Message -----
>>From: "Bruce Toews" <water_drinker@xxxxxxxx>
>>To: <jfw@xxxxxxxxxxxxx>
>>Sent: Saturday, June 04, 2005 10:06 PM
>>Subject: Re: running JAWS 6.0 as a service in windows xp home
>>
>>
>> > Running it from the sys tray is irrelevant in this particular case, but
>> > it
>> > does appear you can get JAWS running earlier if you use a hot key.
>> >
>> > Bruce
>> >
>> > --
>> > Bruce Toews
>> > E-mail and MSN/Windows Messenger: water_drinker@xxxxxxxx
>> > Web Site (including info on my weekly commentaries):
>> > http://www.ogts.net
>> > Info on the Best TV Show of All Time: http://www.cornergas.com
>> >
>> > On Sat, 4 Jun 2005, Gene wrote:
>> >
>> >> I am running mine from the system tray on a hot key. When I hit the
>> >> hot
>> >> key
>> >> after startup it will load in about 10 to 20 seconds. BTW that's 6.1.
>> >>
>> >>
>> >>
>> >> Thanks; Gene
>> >>
>> >> On MSN and Yahoo - guystevens@xxxxxxxxxxxxx
>> >>
>> >>
>> >> ----- Original Message -----
>> >> From: "serrebi" <serrebi101@xxxxxxxxx>
>> >> To: <jfw@xxxxxxxxxxxxx>
>> >> Sent: Saturday, June 04, 2005 8:16 PM
>> >> Subject: Re: running JAWS 6.0 as a service in windows xp home
>> >>
>> >>
>> >>> jaws takes about a minute and a half to load up on my machine when I
>> >>> boot.
>> >>> Got a rather fast cable connection to the net, 5mbit/1mbit, why it
>> >>> would
>> >>> take that long to varafy a lisence I have no idea.
>> >>>
>> >>>
>> >>> ----- Original Message -----
>> >>> From: "Lucia Greco" <lucy@xxxxxxxxxxxxxx>
>> >>> To: <jfw@xxxxxxxxxxxxx>
>> >>> Sent: Saturday, June 04, 2005 4:58 PM
>> >>> Subject: RE: running JAWS 6.0 as a service in windows xp home
>> >>>
>> >>>
>> >>>> Hi:
>> >>>> you already are running Jaws is a service if you have the run Jaws
>> >>>> first
>> >>>> checkbox checked.
>> >>>> The reason draws 60 is taking longer and longer to boot is that the
>> >>>> =
>> >>>> Internet
>> >>>> authorization is checking for valid authorization every time it
>> >>>> started
>> >>>> freedom says they know about this but have not given any word as to
>> >>>> when
>> >>>> =
>> >>>> it
>> >>>> will be fixed. I have seen it slow machines down as much as a minute
>> >>>> and
>> >>>> =
>> >>>> a
>> >>>> half.
>> >>>>
>> >>>> -----Original Message-----
>> >>>> From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
>> >>>> =
>> >>>> Behalf
>> >>>> Of Chris Skarstad
>> >>>> Sent: Saturday, June 04, 2005 2:01 AM
>> >>>> To: jfw@xxxxxxxxxxxxx
>> >>>> Subject: running JAWS 6.0 as a service in windows xp home
>> >>>>
>> >>>>
>> >>>> Hi folks
>> >>>>
>> >>>> For a while now, I had been noticing that it was taking JAWS 6.0 a =
>> >>>> longer=20
>> >>>> time to run when the computer starts.
>> >>>> . I do have a bit of usable vision, and from what I can determine,
>> >>>> =
>> >>>> there=20
>> >>>> are a lot of programs that run before JAWS does, and it looks to me
>> >>>> like
>> >>>> =
>> >>>>
>> >>>> it's actually the very last thing to load. So I have to wait while
>> >>>> all=20
>> >>>> these programs load, and I'm just wondering if there's any way I can
>> >>>> run
>> >>>> =
>> >>>>
>> >>>> JAWS as a service so that it'll run faster at startup? AT least as
>> >>>> I=20
>> >>>> recall, that's what I believe will make it run sooner, rather than =
>> >>>> later.=20
>> >>>> Like I said right now, it's the last, if not one of the very last
>> >>>> thing
>> >>>> =
>> >>>> to=20
>> >>>> start up, and I was curious as to what I could do to make things
>> >>>> start
>> >>>> =
>> >>>> up a=20
>> >>>> little faster. This has been happening ever since I installed JAWS
>> >>>> 6 =
>> >>>> when=20
>> >>>> it first came out last december, but I could never quite put my
>> >>>> finger
>> >>>> =
>> >>>> on=20
>> >>>> why it was just taking so long whereas before it was running a lot =
>> >>>> sooner.
>> >>>>
>> >>>> I hope what I said makes some kind of sense? This isn't like a huge
>> >>>> =
>> >>>> deal=20
>> >>>> or anything, but I like to make sure my computer starts up quickly
>> >>>> so
>> >>>> =
>> >>>> I'll=20
>> >>>> have speech right away.
>> >>>> Thanks for any ideas.
>> >>>>
>> >>>> --
>> >>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> >>>> To unsubscribe from this mailing list, send a message to
>> >>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>> >>>> line.
>> >>>> Archives located at: //www.freelists.org/archives/jfw
>> >>>>
>> >>>> If you have any concerns about the list, post received from the
>> >>>> list,
>> >>>> or
>> >>>> =
>> >>>> the
>> >>>> way the list is being run, do not post them to the list. Rather
>> >>>> contact
>> >>>> =
>> >>>> the
>> >>>> list owner at jfw-admins@xxxxxxxxxxxxxx
>> >>>>
>> >>>>
>> >>>> --
>> >>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> >>>> To unsubscribe from this mailing list, send a message to
>> >>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>> >>>> line.
>> >>>> Archives located at: //www.freelists.org/archives/jfw
>> >>>>
>> >>>> If you have any concerns about the list, post received from the
>> >>>> list,
>> >>>> or
>> >>>> the way the list is being run, do not post them to the list. Rather
>> >>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>> >>>
>> >>> --
>> >>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> >>> To unsubscribe from this mailing list, send a message to
>> >>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>> >>> line.
>> >>> Archives located at: //www.freelists.org/archives/jfw
>> >>>
>> >>> If you have any concerns about the list, post received from the list,
>> >>> or
>> >>> the way the list is being run, do not post them to the list. Rather
>> >>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>> >>>
>> >>
>> >>
>> >> --
>> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> >> To unsubscribe from this mailing list, send a message to
>> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>> >> line.
>> >> Archives located at: //www.freelists.org/archives/jfw
>> >>
>> >> If you have any concerns about the list, post received from the list,
>> >> or
>> >> the way the list is being run, do not post them to the list. Rather
>> >> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>> >>
>> > --
>> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> > To unsubscribe from this mailing list, send a message to
>> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>> > line.
>> > Archives located at: //www.freelists.org/archives/jfw
>> >
>> > If you have any concerns about the list, post received from the list,
>> > or
>> > the way the list is being run, do not post them to the list. Rather
>> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>> >
>>
>>
>>--
>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>To unsubscribe from this mailing list, send a message to
>>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>Archives located at: //www.freelists.org/archives/jfw
>>
>>If you have any concerns about the list, post received from the list, or
>>the way the list is being run, do not post them to the list. Rather
>>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
