Hello Jamie. I am currently using Jaws for Windows version 6.0 through 7.0 with Quicken 2005 I have just not got around to updating to Quicken 2006 yet. There is one thing that you will have to do to get the quick conscripts to load and that is to copy the following three lines to the clipboard. And then open your version of quicken. Open the script manager with the associated file loaded and paste the clipboard. The three lines that should be in the script manager are below. Function AutoStartEvent () SwitchToConfiguration ("quicken") EndFunction I hope this helps. Chris. _____ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Jamie Prater Sent: Friday, October 21, 2005 3:43 PM To: jfw@xxxxxxxxxxxxx Subject: quicken and jfw revisited Hi, listers, I know this is a subject that has been visited repeatedly, and now, I need info on it. I've been using Quicken 2003 with JFW 6.0, and I found out that the 2003 version is the latest version they support. This is very disturbing news to me and I've already written to suggestions@xxxxxxxxxxxxxxxxxxxxx about this. As it stands now, with my banking merging with another, I have just downloaded banking transactions for my check register for the last time in the foreseeable future unless JFW supports quicken 2005 or 2006. Any help and advice would be most appreciated, and you can email privately if you want at jdprater@xxxxxxxxxxxxxx Thanks bunches and have a blessed day.