I ran modify rather than repair to add a Tripple Talk, and maybe didn't even lose my JFW settings. At 06:05 AM 1/6/2004, you wrote: >Hi, >Yes, >Just run the repair utility under jaws tools and you will have the option of >adding other synthesizers. No need to play with the .ini files. >It is similar to reinstalling, but you don't need to do it all from scratch. >Just check the trippletalk synthesizer and complete the prompts and away you >go. > >Dan >----- Original Message ----- >From: "Mary Otten" <maryotten@xxxxxxxxxxxxx> >To: <jfw@xxxxxxxxxxxxx> >Sent: Monday, January 05, 2004 9:20 PM >Subject: making JFW aware of a synthesizer > > > > I have a friend who recently installed JFW 5.0 and used the automatic >install instead of the guided install. Naturally, JAWS didn't pick up on the >fact that his pc has a Tripple Talk pci card, so he now has just > > Eloquence for JFW and apparently the sapi5 voices as well. The question >is: is there a way to tell JFW that the tripple talk pci is there? Or does >he have to uninstall and start over? I know there was a way in the past > > to add synthesizers to the list recognized in one's JFW by going into a >.ini file whose name I don't recall and adding certain synthesizer >parameters. Is that still the only way, and if so, what would he add for his > > trippletalk and where would he put the lines? Or is there now a way to do >a repair or some such, which would let you add a synthesizer in a more >novice-friendly manner? > > Mary > > > > > > To post a message to the list, send it to jfw@xxxxxxxxxxxxx > > To unsubscribe from this mailing list, send a message to >jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. > >To post a message to the list, send it to jfw@xxxxxxxxxxxxx >To unsubscribe from this mailing list, send a message to >jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.