Jaws never did pick up synths automatically that is why the install talks so you can make sure it gets put in, but now I would just run the maintence wizard and chose modify or reinstall will bring up the modify choice also. At 11:20 PM 1/5/04 -0600, you wrote: >I have a friend who recently installed JFW 5.0 and used the automatic >install instead of the guided install. Naturally, JAWS didn't pick up on >the fact that his pc has a Tripple Talk pci card, so he now has just >Eloquence for JFW and apparently the sapi5 voices as well. The question >is: is there a way to tell JFW that the tripple talk pci is there? Or does >he have to uninstall and start over? I know there was a way in the past >to add synthesizers to the list recognized in one's JFW by going into a >.ini file whose name I don't recall and adding certain synthesizer >parameters. Is that still the only way, and if so, what would he add for his >trippletalk and where would he put the lines? Or is there now a way to do >a repair or some such, which would let you add a synthesizer in a more >novice-friendly manner? >Mary > > >To post a message to the list, send it to jfw@xxxxxxxxxxxxx >To unsubscribe from this mailing list, send a message to >jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Tim trouble To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.