Re: hi guys
- From: "Douglas C. DeCamp" <ddecamp@xxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Wed, 7 Sep 2005 19:34:08 -0500
Tony,
I did not have to install this codec on my Dell XP Home SP 2 system. MP3
Directcut installed with no special requirements and used the standard ACM
decoder.
--- HTH ---
Doug
----- Original Message -----
From: Tony Santiago
To: jfw@xxxxxxxxxxxxx
Sent: Wednesday, September 07, 2005 12:52 PM
Subject: Re: hi guys
On this note, do any of you know where I can get the "lamemp3.dll" file? I
want to use the direct cut program, but I was told that I need this file.
Thanks for any help with this. If this is off topic, feel free to contact me
off list. My email address is:
tsantiago128@xxxxxxxxxxxxx
Thanks again.
----- Original Message -----
From: Douglas C. DeCamp
To: jfw@xxxxxxxxxxxxx
Sent: Wednesday, September 07, 2005 7:07 AM
Subject: Re: hi guys
Samer,
I have found the following to be the quickest & easiest for me with MP3
Directcut to cut a song.
1. Ctrl+O - Open desired MP3 file.
2. Use left & right arrow keys & pgup pgdn to get to desired cut point.
3. Switch to JAWS cursor and click the Set begin button with left mouse
button.
4. Position to end of cut and use JAWS cursor to click Set End button.
5. Ctrl+E - bring up export screen to extract the cut MP3 and name it.
You may use the F5, F6, F7, and F8 PF keys to check your begin & end points
for accuracy.
Use Shift with left & right arrow keys to adjust cut points.
This procedure may be repeated as necessary for other MP3 cuts.
--- HTH ---
Doug
----- Original Message -----
From: samer
To: jfw@xxxxxxxxxxxxx
Sent: Tuesday, September 06, 2005 11:14 PM
Subject: hi guys
i am using mp3 directcut with jaws 6 and i am finding some difficulties
in using it with jaws specially if i want to cut asong if anyone of you can
send me some instructions on how to use it with jaws
it will be much apreciated
regards
Other related posts:
