On this note, do any of you know where I can get the "lamemp3.dll" file? I want to use the direct cut program, but I was told that I need this file. Thanks for any help with this. If this is off topic, feel free to contact me off list. My email address is: tsantiago128@xxxxxxxxxxxxx Thanks again. ----- Original Message ----- From: Douglas C. DeCamp To: jfw@xxxxxxxxxxxxx Sent: Wednesday, September 07, 2005 7:07 AM Subject: Re: hi guys Samer, I have found the following to be the quickest & easiest for me with MP3 Directcut to cut a song. 1. Ctrl+O - Open desired MP3 file. 2. Use left & right arrow keys & pgup pgdn to get to desired cut point. 3. Switch to JAWS cursor and click the Set begin button with left mouse button. 4. Position to end of cut and use JAWS cursor to click Set End button. 5. Ctrl+E - bring up export screen to extract the cut MP3 and name it. You may use the F5, F6, F7, and F8 PF keys to check your begin & end points for accuracy. Use Shift with left & right arrow keys to adjust cut points. This procedure may be repeated as necessary for other MP3 cuts. --- HTH --- Doug ----- Original Message ----- From: samer To: jfw@xxxxxxxxxxxxx Sent: Tuesday, September 06, 2005 11:14 PM Subject: hi guys i am using mp3 directcut with jaws 6 and i am finding some difficulties in using it with jaws specially if i want to cut asong if anyone of you can send me some instructions on how to use it with jaws it will be much apreciated regards