OK. Except that it says I have no SMA upgrades remaining. If it works, though, that's great. I'll go see if I can use Remote Desktop, then. _____ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Alex Stone Sent: Sunday, October 08, 2006 8:26 AM To: jfw@xxxxxxxxxxxxx Subject: RE: Upgrading My Authorization Lora, It will all just work. Cheers. Alex -----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]On Behalf Of Lora Sent: 08 October 2006 15:20 To: jfw@xxxxxxxxxxxxx Subject: RE: Upgrading My Authorization Yes, but what about the remote desktop authorization. JAWS needs to be told about that, right? And when I look at my authorization, it says my highest allowed release is 7.0. _____ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Alex Stone Sent: Sunday, October 08, 2006 8:17 AM To: jfw@xxxxxxxxxxxxx Subject: RE: Upgrading My Authorization Lora, You don't have to do anything, Freedom Scientific do it at there end, and when 8.0 comes out it will just work. Cheers. Alex -----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]On Behalf Of Lora Sent: 08 October 2006 15:08 To: jfw@xxxxxxxxxxxxx Subject: Upgrading My Authorization Hi, I bought an SMA, and paid the additional fee to use Remote Desktop. How do I activate these changes in my key, so that JAWS will recognize I can use 8.0 when it comes out, and so I can remote to work? Thanks, Lora