Re: Real Speak
- From: Craig Goodenough <epimetheus27@xxxxxxxxxx>
- To: jfw@xxxxxxxxxxxxx
- Date: Thu, 03 Jun 2004 13:52:24 -0500
Greetings again!!
To modify the Pitch and rate of the new kurzweil voices in Jaws, you
must do the following:
1) Bring jaws up on your screen with Insert + J
2) Press Alt+ L for the language menu
3) Press the letter C. You should hear change synthesizer. A submenu
will open.
4) Arrow down until you hear SAPI 5. and press enter
5) Press Alt + O to open the options menu
6) Press V to open the voices menu.
7) Press I to select the Individual voice adjustment
8) Press Alt + S to select the person selection. Arrow up and down
until you hear NeoSpeak and the voice name.
9) Press Alt M to get to the modify section and press tab once. This
takes you to the Jaws voice selection ..i.e. PC cursor voice, Jaws
Cursor voice etc.
10) You can modify the voice listed, or press down arrow to select one
of the other cursors.
11) Alt + R to get the voice Rate adjustment. Right or left Arrow until
you get an acceptable rate. I prefer setting the rate at 10.
12) Press Alt + P to get to the pitch adjustment. Use the right and
left arrow to set the pitch. I prefer the pitch to be 11.
13) Press Alt + A to apply the changes
14) Press Alt + O to close the individual voice adjustment window.
Note: you must select each cursor voice to be modified individually.
INote2: If Sapi 5 is not set as your default synthesizer, than jaws will
revert to its default synthesizer for the next time you run jaws. You
can either set the SAPI 5 synth as default, or change the synthesizer
when you need it.
The settings we set for the individual voices will stay, as long as you
press the Alt + A.
If you need any more help..just ask.
Cheers
Craig
VirtualKnight wrote:
>how did you configured itr to work with Jaws??
>thanks for your help.
>
>----- Original Message -----
>From: "Craig Goodenough" <epimetheus27@xxxxxxxxxx>
>To: <jfw@xxxxxxxxxxxxx>
>Sent: Thursday, June 03, 2004 11:25 AM
>Subject: Re: Re: Real Speak
>
>
>
>
>>Greetings everyone!!
>>Most of the sluggishness in Realspeak may be cleared up by making
>>adjustments to the pitch and rate of the voice. I found that I had to
>>adjust the pitch and rate for the Voices that come through Kurzweil 1000.
>>
>>Cheers
>>
>>Craig
>>
>>
>>
>>val smith wrote:
>>
>>
>>
>>>Hi lister
>>>yes I have configured itr to work with Jaws, but found it to be very
>>>sluggish.
>>>cheers
>>>Val
>>>----- Original Message -----
>>>From: "emarquette" <emarquette@xxxxxxxxxxxxx>
>>>To: <jfw@xxxxxxxxxxxxx>
>>>Sent: Thursday, June 03, 2004 12:46 AM
>>>Subject: Real Speak
>>>
>>>
>>>
>>>
>>>
>>>
>>>>ScanSoft, makers of OmniPage, Dragon, and others, offers a product
>>>>called Real Speak (I think). At least that is what I was told.
>>>>I accidentally triggered it. The speech was so realistic I first
>>>>thought it was prerecorded digitized speech. Then, I realized that it
>>>>was indeed text-to-speech algorithms at work.
>>>>Perhaps this product goes by another name. Has anyone tried this with
>>>>JFW?
>>>>
>>>>Ed Marquette
>>>>930 West 34th St.
>>>>Kansas City, MO 64111
>>>>(816) 561- 7111
>>>>
>>>>--
>>>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>>>To unsubscribe from this mailing list, send a message to
>>>>
>>>>
>>>>
>>>>
>>>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>>
>>>
>>>
>>>
>>>>Archives located at: //www.freelists.org/archives/jfw
>>>>
>>>>If you have any concerns about the list, post received from the list, or
>>>>
>>>>
>>>>
>>>>
>>>the way the list is being run, do not post them to the list. Rather
>>>
>>>
>contact
>
>
>>>the list owner at jfw-admins@xxxxxxxxxxxxxx
>>>
>>>--
>>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>>To unsubscribe from this mailing list, send a message to
>>>
>>>
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>
>
>>>Archives located at: //www.freelists.org/archives/jfw
>>>
>>>If you have any concerns about the list, post received from the list, or
>>>
>>>
>the way the list is being run, do not post them to the list. Rather contact
>the list owner at jfw-admins@xxxxxxxxxxxxxx
>
>
>>>
>>>
>>>
>>--
>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>To unsubscribe from this mailing list, send a message to
>>
>>
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>
>
>>Archives located at: //www.freelists.org/archives/jfw
>>
>>If you have any concerns about the list, post received from the list, or
>>
>>
>the way the list is being run, do not post them to the list. Rather contact
>the list owner at jfw-admins@xxxxxxxxxxxxxx
>
>
>
>
>--
>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a message to
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>Archives located at: //www.freelists.org/archives/jfw
>
>If you have any concerns about the list, post received from the list, or the
>way the list is being run, do not post them to the list. Rather contact the
>list owner at jfw-admins@xxxxxxxxxxxxxx
>
>
>
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
