RE: MS Visio with JFW
- From: "Chip Orange" <Corange@xxxxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Mon, 8 Sep 2008 17:52:22 -0400
There is, but it's quite the same as 2003. See my other note on this
thread.
Chip
------------------------------
Chip Orange
Database Administrator
Florida Public Service Commission
Chip.Orange@xxxxxxxxxxxxxxx
(850) 413-6314
(Any opinions expressed are solely those of the author and do not
necessarily reflect those of the Florida Public Service Commission.)
________________________________
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]
On Behalf Of Bissett, Tom
Sent: Monday, September 08, 2008 10:48 AM
To: jfw@xxxxxxxxxxxxx
Subject: RE: MS Visio with JFW
Hi Rikk, I am interested to know the version of visio you will
be working with. I have never created a visio diagram but receive a
number of them. I find them pretty much inaccessable. You can tab
around in them to here some of the information but there is no
relationship between the bits of information. I have tried exporting
the information I have tried OCR on them but it always comes back to not
having the relationship which is usually the most important part of the
diagram.
I have only used up to ms visio 2003 so if there is a 2007 I
would be interested in its accessability.
Regards
Tom Bissett
BMO Financial Group
Technology and Operations
Integrated Client Solutions
Tel: (416) 549-6514
E-Mail tom.bissett@xxxxxxx <mailto:tom.bissett@xxxxxxx>
________________________________
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]
On Behalf Of Rikk
Sent: Sunday, September 07, 2008 5:13 PM
To: jfw@xxxxxxxxxxxxx
Subject: MS Visio with JFW
Hi group.
I'm taking intro to MS Visio, and was wondering if anyone has
any experience using it with JFW.
Any experience or help would be great.
Thanks for any help,
Other related posts:
