A bit involved isn't it!, will try it when I have a pair of working eyes at my disposal for a while and let you know how I get on. Thanks. Marie ----- Original Message ----- From: "Phil Medway" <philmedway@xxxxxxxxxxxxxxxx> To: <jaws-uk@xxxxxxxxxxxxx> Sent: Monday, August 21, 2006 4:03 PM Subject: [jaws-uk] Re: Graphics labeller > Hi Marie, > > It may depend on how the buttons have been coded. > > You may be able to persuade Jaws to label them automatically by > temporarily > setting the graphics to all JawsKey+v then g for graphics verbosity, space > bar until you hear all then tab to close and press enter. After setting > the > graphics to all, control+JawsKey+g will start the graphics labeller. > > If this doesn't help, you should, with sighted help, be able to use the > prompt create facility as follows: > > position the cursor on the button you wish to label. > > press JawsKey+f2 then p to bring up the prompt create wizard. > > Enter the text you wish to hear when you land on that button and tab to > next > and press enter. > > Enter the Braille text you wish to read, if any and press next. > > You may now enter tutor instructions, tab to finish and press enter. > > This should label your button but you will have to go through this process > for each button you wish to label. > > HTH, > > Phil Medway > > philmedway@xxxxxxxxxxxxxxxx > > tel: 01869 347639 > > mobile: 07980 519990 > > Skype: philmedway > > > ----- Original Message ----- > From: "Marie BAISEZ" <marie.baisez@xxxxxxxxxx> > To: <jaws-uk@xxxxxxxxxxxxx> > Sent: Monday, August 21, 2006 12:31 PM > Subject: [jaws-uk] Graphics labeller > > > Hi all, > My ISP's portal has changed since it's become Orange. > I use this as little as I can. However, on the main screen next to the > counting clock telling me how long I've been connected so far are a series > of graphics read by JFW v.7 as buttons. > I've tried to route the jaws cursor on these to try to label them but am > told that the jaws cursor is not on a graphic when I press the jaws key > plus > g. > Why is this? I thought that, with the help of a sighted person I would > have > been able to label those buttons, are buttons not graphics then? please > someone, enlighten me... > Thanks in advance. > > Marie > > ** To leave the list, click on the immediately-following link:- > ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** jaws-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > -- > This email has been verified as Virus free > Virus Protection and more available at http://www.plus.net > > ** To leave the list, click on the immediately-following link:- > ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** jaws-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** jaws-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq