[iyonix-support] Re: Internal Card Reader start-up problem
- From: Chris Evans <chris@xxxxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Thu, 4 May 2006 13:38:37 +0100 (BST)
On Thu 04 May, William Lack wrote:
>
> I have an early Iyonix running 5.11, up to date, with all hardware mods and a
> fairly new power supply. I have an internal multi-card reader bought from
> CJE.
>
> Quite often (say 25% of the time) when I start up the red light on the reader
> does not go out (it usually does so about a second or two after I press the
> blue button). The card reader will not then work, gives no icons and does not
> show on *USBDevices. !USBKick won't re-start the reader.
> The only solution seems to be to shut down and power up again.
We have noticed that some readers will only work correctly if the flash
media is in the reader before the reader is plugged in!
As your reader is always plugged in, try puting the flash media in before
powering up the computer.
Chris Evans
--
CJE Micro's / 4D 'RISC OS Specialists'
Telephone: 01903 523222 Fax: 01903 523679
chris@xxxxxxxxxxxxxxx http://www.cjemicros.co.uk/
78 Brighton Road, Worthing, West Sussex, BN11 2EN
The most beautiful thing anyone can wear, is a smile!
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
Other related posts:
