[iyonix-support] Re: IDE device changes - Mode 28
- From: Alan Adams <alan@xxxxxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Wed, 20 Apr 2011 13:10:17 +0100
In message <0949e1c651.Iyonix@xxxxxxxxxxxxxxxxxxx>
Ron <iyonix@xxxxxxxxxxx> wrote:
> I have been using a hd on channel 1 and a cdrom on channel 2
> for a long time. I also have Geminus in use.
> When changing the drive configuration, for example changing
> the cdrom to another hd, I get mode 28 and it appears it
> would take a delete-power-on or the like to snap out of it.
> I didn't like to try this, as reverting back to the original
> drive configuration gets the normal behaviour back.
I suspect the computer is booting from the newly added disc - the boot
then may not have the appropriate monitor definitions set.
> I did set CDROMS =0 before changing, I'm wondering now if
> I should have disabled Geminus first.
> TIA Ron M.
> ---
> To alter your preferences or leave the group,
> visit //www.freelists.org/list/iyonix-support
> Other info via //www.freelists.org/webpage/iyonix-support
> List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx
--
Alan Adams, from Northamptonshire
alan@xxxxxxxxxxxxxxxx
http://www.nckc.org.uk/
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx
Other related posts:
