RE: again smtp filter
- From: "Steve Moffat" <steve@xxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 7 Nov 2002 21:44:47 -0000
What you have to do is remove the smtp publishing rule and republish it
selecting the localhost option, then you need to set up a connector on
your exchange server to the isaserver smtp server.
Steve
-----Original Message-----
From: Rob [mailto:rob@xxxxxxxxxxxxxxxxxx]
Sent: Thursday, November 07, 2002 10:16 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] again smtp filter
http://www.ISAserver.org
As i have read the documents.
THey say you have to have three servers for message screening. Wel i
only have isa and my mail server. So, i installed the smtp service. And
configured smtp filter, all according to the documetn message screening.
Now i can send mail but i can't receive it. ISA server gives this
warning: Server publishing rule [Mail wizard rule - SMTP Server.
Published IP: 150.3.0.1] that maps 192.168.0.6:25 TCP to 150.3.0.2:25
for protocol [SMTP Server] failed because the port on the external
interface is being used by another application. The Firewall service
failed to bind socket for the server on the firewall since another
process is using the same port. Check for any other process using the
same port and terminate if necessary.
So is it possible to let the isa server also be the message screening
server.
Greetings Rob
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site: http://www.msexchange.org/ Windows
Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT
Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
steve@xxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
This E-Mail is confidential. It is not intended to be read, copied, disclosed
or used by any person other than isalist@xxxxxxxxxxxxxx
Unauthorised use, disclosure, or copying is strictly prohibited and may be
unlawful. Optimum Computer Solutions disclaims any liability for any action
taken in connection of this E-Mail. The comments or statements expressed in
this E-Mail are not necessarily those of Optimum Computer Solutions or its
subsidiaries or affiliates.
usermanager@xxxxxxxxxxxxxxx
Other related posts:
