RE: Tandberg Video Conferencing thru ISA help
- From: <thekevin@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 3 Jun 2005 19:27:47 -0500
You'd want map to anything else if you required a secured connection on
everything.
thekevin
----- Original Message -----
From: Barbara Causey
To: [ISAserver.org Discussion List]
Sent: Friday, June 03, 2005 12:39 PM
Subject: [isalist] RE: Tandberg Video Conferencing thru ISA help
http://www.ISAserver.org
Do you remember which one you used on the mapped server protocol tab? You
have to choose one. HTTP maybe?
Thank you,
Barbara
----- Original Message -----
From: Ball, Dan
To: [ISAserver.org Discussion List]
Sent: Thursday, June 02, 2005 11:11 PM
Subject: [isalist] RE: Tandberg Video Conferencing thru ISA help
http://www.ISAserver.org
No, I completely disabled all H.323 options, on the ISA server and the
video unit, and it worked just fine. In fact, it appeared smoother running
through the ISA server than directly attached to the Internet (or it might have
just been my imagination).
----------------------------------------------------------------------------
From: Barbara Causey [mailto:barbara@xxxxxxxxxxxxx]
Sent: Thursday, June 02, 2005 16:58
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Tandberg Video Conferencing thru ISA help
http://www.ISAserver.org
Thank you Dan for your help. In publishing as a server on the mapped server
protocol tab do you remember if this has to be H.323?
Barbara
----- Original Message -----
From: Ball, Dan
To: [ISAserver.org Discussion List]
Sent: Thursday, June 02, 2005 1:24 PM
Subject: [isalist] RE: Tandberg Video Conferencing thru ISA help
http://www.ISAserver.org
It's been almost six months since I upgraded, and I don't remember off
the top of my head the proper sequences to publish it in ISA2000. If I was
sitting at the computer, I could figure it out, but don't remember how to do it
without references. One of these other guys can help you out with that part a
lot easier than I can.
Here's the general idea of what you need to do:
1.. Disable the gatekeeper (if you're not using it for anything else),
just to take that out of the equation. When you publish it as a server you're
circumventing that anyways.
2.. Look in the setup menus of the video unit to determine what ports
it is using (At least on the PolyCom unit they were listed there).
3.. Enter a static IP on the video unit.
4.. Create protocol definitions in the ISA server matching the ports
that you found in step 2.
5.. Create some rules to publish the ports you just defined, and
redirect them to the IP address of the video unit.
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
World of Windows Networking: http://www.windowsnetworking.com
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
barbara@xxxxxxxxxxxxx
To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=isalist
Report abuse to listadmin@xxxxxxxxxxxxx
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
World of Windows Networking: http://www.windowsnetworking.com
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
thekevin@xxxxxxxxxxxx
To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=isalist
Report abuse to listadmin@xxxxxxxxxxxxx
Other related posts:
