Hello, I have a strange issue in allowing outbound PPTP using TMG (SP1). I want to allow outbound PPTP connections from a segment where clients are SecureNet clients and a NAT relationship exists between the segment and the external interface. I noticed connections are working fine only: - if VPN Client access on the TMG is disabled OR - if VPN client access is enabled and PPTP vpn access is checked in the VPN Client Properties > Protocols tab. In each other case, the clients gets stuck on the 'Verifying username and password' dialog box and eventually times out with error 619. Note I don't want to set up a vpn towards the TMG server, only allow outbound PPTP connections. I remember a setting 'Enable IP Routing' in ISA 2006 which was required for outbound PPTP but can't find this anymore within TMG. Anyone noticed the same behavior or any explanation for this? Thanks, Wim