RE: NAT problem
- From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Wed, 1 Oct 2003 09:26:52 -0500
Hi Nick,
Have you tried an FTP server publishing rule yet? All communications
between LAT and non-LAT hosts are NAT'd, so if that's what you want, ISA
will do it for you.
HTH,
Tom
Thomas W Shinder
www.isaserver.org/shinder
ISA Server and Beyond: http://tinyurl.com/1jq1
Configuring ISA Server: http://tinyurl.com/1llp
-----Original Message-----
From: nick [mailto:njiko@xxxxxxxxx]
Sent: Wednesday, October 01, 2003 4:58 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] NAT problem
http://www.ISAserver.org
Hello,
I've got a problem with NAT translation...
I've got an FTP server on my front end net (with static IP for example:
10.10.10.10).
In my configuration, ISA Server is the firewall between the frontend and
backend (internal) network (for example with range IP: 192.168.200.x)
Is it possible with ISA to NAT the ftp server to the internal network?
for example, I would that the internal user could see the ftp like an
internal machine (for example with IP address 192.168.200.200)
thanks a lot
best regards
nick
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
