Re: HTTPS Sites
- From: "Walkowiak, Matt" <Matt.Walkowiak@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Wed, 1 May 2002 10:14:33 -0500
The only thing I have to add is to make sure that the HTTPS protocol
(443) is allowed thru...
Matt
-----Original Message-----
From: Graham Walsh [mailto:graham.walsh@xxxxxxxxxxxxx]
Sent: Wednesday, May 01, 2002 9:12 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: HTTPS Sites
http://www.ISAserver.org
Has anyone any other thoughts on this as it is still not working.
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: 22 April 2002 14:47
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: HTTPS Sites
http://www.ISAserver.org
Take "/*" out of the path field.
HTTPS connections can't be evaluated on the path, so if one is
specified,
the whole site is HTTPS-denied. Jim Harrison MCP(NT4, W2K), A+,
Network+,
PCG http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: "Graham Walsh" <graham.walsh@xxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Monday, April 22, 2002 5:58 AM
Subject: [isalist] HTTPS Sites
http://www.ISAserver.org
All
I have a customer that wants to block all sites apart from a destination
set
that contains the sites they want the call centre people to access to
process credit card details.
When I enable the S&C rules, the users can access the normal sites but
not
the HTTPS part of the site. In the Destination Set what should I be
putting, eg www.securetrading.net or https://securetrading.net with the
path
of /*
The config is W2k, ISA SP1 and NT4 Clients with the FW client installed.
Your help would be much appreciated.
Regards
Graham
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
graham.walsh@xxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
This Email is intended for the recipient mentioned, it's contents are
confidential. If you are not the intended recipient please notify the
sender
immediately, without copying or onward transmission. In so far as the
message in this email contains any form of offer to enter into or vary
any
contract as email communication is insecure such offer is subject to
verification by ourselves, any offer is subject to signature and
completion
of our standard terms and business conditions.
Any views or opinions expressed in this message are those of the author
and
do not necessarily represent those of this company or any of its
affiliates.
The contents of this message has been virus checked using Trend Micro
ScanMail.
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
matt.walkowiak@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
