Hi Faizal, Yes, that configuration works fine. I thought that perhaps Steve was able to get machines dialing into the ISA Server itself to be SecureNAT clients. Thanks! Tom Thomas W Shinder <http://www.isaserver.org/shinder> www.isaserver.org/shinder -----Original Message----- From: Faizal Khan [mailto:mis@xxxxxxxxxxxxxx] Sent: Thursday, August 15, 2002 1:07 PM To: [ISAserver.org Discussion List] Subject: [isalist] Getting Mails Cont' http://www.ISAserver.org Jim, Tom, Steve, My configurations allow me to dial in using RAS connection, active directory validates the user authentication, ISA is used to managed access all external access, not internal. The machines used to dial in is a SNAT client with gateway being the Server IP. The gateway is hard-coded into the dialup connectoids to make it a SNAT client. It works Jim, I have done it, however when it comes to receiving mails via pop3 I am having problems, because my mail can neither send or receive emails via pop3. If I hard-code my smtp settings to my COMPUTER NAME I can send mails ok but cannot receive. I have not use a FWCient, I will try that one out.... Steve, you said you have done this is there any particular settings you have enabled? With Kind Regards, Khan ____________________________ Faizal Khan MIS Manager Guyana Forestry Commission 1 Water Street, Kingston, Georgetown, GUYANA. Tel : + (592) 226-7272 Fax : + (592) 226-8956 Email: <mailto:forestry.mis@xxxxxxxxxxxxxxxxx> forestry.mis@xxxxxxxxxxxxxxxxx Website: <http://www.sdnp.org.gy/forestry> http://www.sdnp.org.gy/forestry ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')