:) From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Harrison Sent: Friday, April 03, 2009 8:22 PM To: ISA Mailing List Subject: [isalist] Re: DCHP Relay Agent Only from Bermuda... You're not used to this by now? From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Moffat Sent: Friday, April 03, 2009 3:13 PM To: ISA Mailing List Subject: [isalist] Re: DCHP Relay Agent What a friggin' rigmarole to see that... The requested recording could not be viewed. The recording ID or key may be incorrect. From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Harrison Sent: Friday, April 03, 2009 7:00 PM To: ISA Mailing List Subject: [isalist] Re: DCHP Relay Agent Like unto thusly. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?culture=en-US&EventID=1032298132 From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of William T Holmes Sent: Friday, April 03, 2009 12:49 PM To: isalist@xxxxxxxxxxxxx Subject: [isalist] DCHP Relay Agent Hello, I use ISA-2006 server as a router within my test network(s). I have RRAS configured to provide routing between three different internal subnets. I have my ISA 2006 configured to route traffic between the networks. I have configured the DHCP relay agent on my ISA Server's RRAS to forward DHCP packets to my DHCP server. I have also configured the DHCP server with a scopes for all the subnets. The DHCP relay on the server is receiving the requests and indicates that its responding but I am not getting addresses assigned. Is there a tutorial for configuring this configuration? Thanks Bill