Re: Check NLB in ISA Array
- From: "Jim Harrison" <jim@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sat, 3 Aug 2002 06:41:29 -0700
You should install a third NIC for NLB communications; trying to have NLB
communications on the same
NIC as normal traffic is a huge PITA.
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: "Lim, Arthus T." <alim@xxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Saturday, August 03, 2002 3:45 AM
Subject: [isalist] Re: Check NLB in ISA Array
http://www.ISAserver.org
This is what I did. Will someone tell me if I configured the NLB over
ISA array correctly?
Server 1
Cluster Parameters
Primary IP Address I92.168.0.20
Subnet Mask 255.255.255.0
Full Internet Name server1.courcompany.com
Multicast Support Checked
Host Parameters
Priority 1
Initial Cluster Rate Active is checked
Dedicated IP Address 192.168.0.16
Subnet Mask 255.255.255.0
Port Rules Default Settings
Server 2
Cluster Parameters
Primary IP Address I92.168.0.20
Subnet Mask 255.255.255.0
Full Internet Name server1.courcompany.com
Multicast Support Checked
Host Parameters
Priority 2
Initial Cluster Rate Active is checked
Dedicated IP Address 192.168.0.18
Subnet Mask 255.255.255.0
Port Rules Default Settings
Note that I added the VIP Address as a second IP address under the
advanced section of TCP/IP properties for the load-balanced LAN
Connection for the two servers.
When I tried to surf, download, etc to check if I configured it
correctly, I noticed in the ISA performance monitor that server 2 was
the one who worked which should never be the case because I set first
priority to server 1. Also, I get an IP conflict error because of
192.168.0.20 is configured as secondary IP in both servers.
What are the errors I made and how can I address those errors? Please
help me. Thanks.
-----Original Message-----
From: Gabriel Zabal [mailto:gabriel@xxxxxxxxxxx]
Sent: Friday, August 02, 2002 9:07 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Check NLB in ISA Array
http://www.ISAserver.org
I configured 2 servers in array mode. and NLB on the internal interface.
I tested very much and it works right, it uses both servers.
----------------------------------------
Gabriel Zabal
Ing. Sistemas
gabriel@xxxxxxxxxxx
----------------------------------------
----- Original Message -----
From: "Lim, Arthus T." <alim@xxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Friday, August 02, 2002 2:54 AM
Subject: [isalist] Check NLB in ISA Array
http://www.ISAserver.org
I configured network load balancing in 2 ISA servers in an array. How
will I know that it's really working? That if I use only 1 internal ip,
both servers are working together. Please advice. Thanks
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
gabriel@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
alim@xxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
