I remember seeing somewhere that the destination must be included in the LAT ? I'm not sure though. -----Original Message----- From: Nick Chadwick [mailto:nick@xxxxxxxxxxxxxx] Sent: 05 September 2001 11:38 To: [ISAserver.org Discussion List] Subject: [isalist] Accessing a remote ISA VPN from behind ISA server http://www.ISAserver.org Hi folks. I am having problems connecting to a remote VPN from behind our ISA server. The remote VPN is set up using the standard Win2k RRAS. As a control experiment, I have configured our ISA server with a protocol rule allowing "All IP traffic", packet filtering is turned off, and the "Allow PPTP through ISA server" option is checked. When I try to connect to the remote VPN from my laptop, I get the error 769 unable to reach destination message. I can connect to the remote machine using Terminal Services, so I know the destination IS reachable. Also, I CAN connect to the remote VPN if I sit at our ISA server, but not from other machines behind it. Any ideas? Thanks Nick Chadwick Development & Technical Support Manager Comsoft Limited, UK Tel: +44-(0)20-8240-4452 Fax: +44-(0)20-8240-4449 Mobile: +44-(0)7740-362408 Email: nick@xxxxxxxxxxxxxx <mailto:nick@xxxxxxxxxxxxxx> Web: http://www.comsoft.ltd.uk/ ********************************************************************** Disclaimer: This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then permanently delete the message from your computer. If you are not the intended recipient you must not use, disclose, distribute, copy, print or rely on the e-mail. The opinion expressed in this Email is that of the author and not necessarily that of Comsoft Limited. While attachments are virus checked, Comsoft Limited do not accept any liability in respect of a virus which is not detected. ********************************************************************** ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: hugh.roberts@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') Engen Petroleum Limited disclaim all liability for any loss, damage or expense however caused, arising from the sending, receipt, or use of this e-mail communication and on any reliance placed upon the information provided through this service and does not guarantee the completeness or accuracy of the information.