I searched in google, the configuration of Domains and mail relaying !!
please give some hints on it !!
2009/3/29 Raja Subramanian <rajasuperman@xxxxxxxxx>
Sorry for the top post.
Somewhere in your config you need to mention which domains can be
considered local and which ones are remote. I don't see this in your
config below.
After this step, you'll also need to configure your server to permit
mail relaying. This ensures that clients can send mail to non-local
domains by using your smtp server as a relay host.
HTH.
Raja
On 28/03/2009, Dinesh Kumar <dineshatit@xxxxxxxxx> wrote:
hello,
We are using Mail Server as PowerMail .*
*Configuration follows
PowerMail Version : powermail-1.7-1
powersmtp.conf has
config-dir=/etc/powermail
listen-address=0.0.0.0
listen-port=25
loglevel=3
max-msg-kb=2500
max-userbase-connections=10
smtp-sender-address=127.0.0.1
smtp-sender-port=25
text-base=/etc/powermail/mailboxes
userbase=text
When sending mail using telnet SMTP(25) ,while entering rcpt
to:xx@xxxxxxxxx <to%3Axx@xxxxxxxxx><to%3Axx@xxxxxxxxx<to%253Axx@xxxxxxxxx>
it says "*550 No such mailbox found*"
but mail sending between our domains it works but other domains like
gmail,yahoo not working .
Any configuration to be done ? solve please ?
_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
--
- Raja
_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc