Bharathi,
When the device is being shown as disconnected, do a dmesg|tail and check if
its showing a disconnection there. It should be H/W problem and need not be
a generic one for their product. Perhaps just a faulty device. AFAIK the
change in /dev entry usually occur only if there is a physical disconnection
and there is no rule defined for the device in udev rules.
It _may_ not be a minicom issue. Check dmesg first.
On Tue, May 4, 2010 at 11:18 AM, Kenneth Gonsalves
<lawgon@xxxxxxxxxxxxxxx>wrote:
On Tuesday 04 May 2010 10:33:47 am Bharathi Subramanian wrote:
Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
Port
as far I know prolific is the driver which comes with linux systems to run
a
serial converter. And the port is /dev/ttyUSB0
--
regards
kg
http://lawgon.livejournal.com
_______________________________________________
ILUGC Mailing List:
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
