Dear All .....
What I have -->>
I have D945GSEJT intel desktop board and KEMX-2130 intel atom N270
industrial mother board, both the boards are PCI(revision 2.3
complaint )....And i have a digium TE110P...PCI card( PRI ) ..
Both the boards are running CentOS 5 & asterisk 1.4.29
My problem is -->
With KEMX-2130 it is working fine but with D945GSEJT it is not
functionaing properly ,ie Call is not routing to PBX-PRI to asterisk
PCI-PRI
What I already Observed --->
In D945GSEJT board ,the TE100P PCI card gives both 3.3V and 5V found OK .
And the same card is working fine with KEMX-2130
PCI latency timer changed in BIOS and checked it is still not working
MMCONFIG edited but no use.
Pls help me with you valuble advice ..
Thanks and regards,
Gireesh
9895210247
