[Ilugc] [OT] is it possible to connect two computers using adsl modems

  • From: narendra.sisodiya@xxxxxxxxx (narendra sisodiya)
  • Date: Mon Nov 2 23:56:59 2009

On Mon, Nov 2, 2009 at 1:23 PM, narendra sisodiya
<narendra.sisodiya@xxxxxxxxx> wrote:

On Mon, Nov 2, 2009 at 1:15 PM, Arun Khan <knura@xxxxxxxxx> wrote:
On Monday 02 Nov 2009, narendra sisodiya wrote:
On Mon, Nov 2, 2009 at 10:28 AM, Arun Khan <knura@xxxxxxxxx> wrote:
On Monday 02 Nov 2009, narendra sisodiya wrote:
... snip ...

IMHO, 500m crossover cable can connect,,

ethernet may require a repeater. ? Another possibility - a serial
connection (null modem) using twisted pair (shielded if you can
afford it). ?One computer is the client, the other is the server.
?TCP/IP stack over PPP connection.

Yes, that is good idea, May you explain more?
The idea was more of a concept in my mind rather than an implemented
solution. ?Having seen remote terminals (console) connected over
twisted pair (TP), to servers across campus, I see the PPP stack as an
extension of that idea. ?The modem "chat" aspect may not be necessary
in the client side connection setup. ?Likewise, on the server side
setup RAS on the serial tty.

serial transmission ?
Yes.

are you saying to transmit over DB9 connector ??
Yes.
500m over DB9 cable ? it seems much difficult as at slow speed their
will be lots of distortion in signal.
I do not think so it may work,,
from : http://en.wikipedia.org/wiki/RS-232
"The standard does not define a maximum cable length but instead
defines the maximum capacitance that a compliant drive circuit must
tolerate. A widely-used rule-of-thumb indicates that cables more than
50 feet (15 metres) long will have too much capacitance, unless
special cables are used. By using low-capacitance cables, full speed
communication can be maintained over larger distances up to about
1,000 feet.[7] For longer distances, other signal standards are better
suited to maintain high speed."


--
Arun Khan
_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc




--
???????????????????????????
? ? ?Narendra Sisodiya ( ???????? ???????? )
? ? ?Web : http://narendra.techfandu.org
? ? ?Twitter : http://tinyurl.com/dz7e4a
???????????????????????????




-- 
???????????????????????????
?    Narendra Sisodiya ( ???????? ???????? )
?    Web : http://narendra.techfandu.org
?    Twitter : http://tinyurl.com/dz7e4a
???????????????????????????

Other related posts: