You can have only one coutry setting in xawtv. Try 'zapping' which enables
you to tune channels which belong to different country settings. Also try out
'kwintv' which has option to tune channels manually.
xawtv works fine for me (Pinnacle TV Tuner)
From: prem <premsagar@xxxxxxxxxxxxxx>
To: "Basker.P" <basker@xxxxxxxxxxxx>
Date: 30 Dec 2002 08:56:05 +0000
Subject: Re: [Ilugc] Indian channels & TV tuner on linux
use scantv command to scan all the channels. It is working fine here in
when u switch on xawtv if the system hangs, switch it on with -noxv
On Mon, 2002-12-30 at 17:35, Basker.P wrote:
Has anyone got xawtv working for indian channels? Did it work out of the
box or was some tweaking required. I'd managed to get my Mercury TV tuner
card configured after some struggle, but am unable to view any channels.
There isn't anything wrong with the driver, only the channel's dont show
up. Everything seems to be pointing to the xawtv configuration/tuning.
xawtv claims to be supporting PAL, NTSC & SECAM, doesn't mention much
about PAL-B which I believe is used here. Also there is no frequency chart
Hope someone has got it working.
To unsubscribe, email ilugc-request@xxxxxxxxxxxxxxxxxx with
"unsubscribe <password> address"
in the subject or body of the message.