use scantv command to scan all the channels. It is working fine here in
my place.
when u switch on xawtv if the system hangs, switch it on with -noxv
flag.
Regards
Prem
On Mon, 2002-12-30 at 17:35, Basker.P wrote:
Has anyone got xawtv working for indian channels? Did it work out of the
box or was some tweaking required. I'd managed to get my Mercury TV tuner
card configured after some struggle, but am unable to view any channels.
There isn't anything wrong with the driver, only the channel's dont show
up. Everything seems to be pointing to the xawtv configuration/tuning.
xawtv claims to be supporting PAL, NTSC & SECAM, doesn't mention much
about PAL-B which I believe is used here. Also there is no frequency chart
for India.
Hope someone has got it working.
Thanks,
P.Basker
_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxxxxxxx with
"unsubscribe <password> address"
in the subject or body of the message.
http://www.aero.iitm.ernet.in/mailman/listinfo/ilugc
