On 6/28/06, ~adarsh~ <vpadarsh@xxxxxxxxx> wrote:
On 6/28/06, Binand Sethumadhavan <binand@xxxxxxxxx> wrote:i configured it from the MNF GUI . What all config files i should place?
On 28/06/06, ~adarsh~ <vpadarsh@xxxxxxxxx> wrote:
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:03:99:88:ec:dc brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:02:a5:b1:45:33 brd ff:ff:ff:ff:ff:ff
4: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
There are no IPSec interfaces there; so what are your left/right
subnets? Please post your config files as well.
of "ip route show".
it says
217.66.217.128/28 dev eth1 scope link
192.168.1.0/24 via 217.66.217.142 dev eth1
152.109.247.0/24 dev eth0 scope link
127.0.0.0/8 dev lo scope link
default via 217.66.217.142 dev eth1
and
195.229.190.151/28 dev eth1 scope link
152.109.247.0/24 via 195.229.190.151 dev eth1
192.168.1.0/24 dev eth0 scope link
127.0.0.0/8 dev lo scope link
default via 195.229.190.151 dev eth1
Binand
--
Adarsh