[PCB_FORUM] Re: version 15.2
- From: "Chad Saathoff" <chads@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 29 Jun 2004 15:10:54 -0500
You will need to have a 15.2 license in order to run 15.2.
________________________________
From: Dal Locke [mailto:dlocke@xxxxxxxxxx]
Sent: Tuesday, June 29, 2004 2:46 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: version 15.2
Anybody loaded 15.2 and having problems with the license file?
I get No licence found, exiting.
My license is good for 15.
Must be something different on this rev?
Thanks for any help . . . .
-----Original Message-----
From: Andy_Kulik@xxxxxxx [mailto:Andy_Kulik@xxxxxxx]
Sent: Monday, June 28, 2004 1:24 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: version 15.2
it is available on downloads.cadence.com
jack.kelly@xxxxxxxxxx
Sent by:
06/28/2004 02:18 PM
Please respond to
icu-pcb-forum@xxxxxxxxxxxxx
To
icu-pcb-forum@xxxxxxxxxxxxx
cc
Subject
[PCB_FORUM] Re: version 15.2
anyone heard when 15.2 will be available?
-----Original Message-----
From: Tony Stanislao [mailto:stanislao_t@xxxxxxxxxxxx]
Sent: Monday, June 28, 2004 12:21 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Routing in Ver 15.1
I added "set acon_oldcmd = TRUE" to my local env and it
now routes the
way it did in Ver 14.
Thanks for everyone's help on my problem.
Tony Stanislao, Senior PCB Design Engineer
Pannaway Technologies | v: 603.766.5129| e:
stanislao_t@xxxxxxxxxxxx
=========================================
-----Original Message-----
From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx]
Sent: Thursday, June 24, 2004 4:51 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Routing in Ver 15.1
Tony, I believe if you download the latest updates It
may fix your
problem.>
> From: "Gary MacIndoe" <gary.macindoe@xxxxxxx>
> Date: 2004/06/24 Thu PM 03:41:06 EDT
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Routing in Ver 15.1
>
> Tony,
>
> This was driving me crazy also, and my support guy
managed to get it
fixed.
> But... he's not here now (on a one month vacation!),
and I can't
remember
> what he did to fix it. I can't find a setting in User
Preferences,
and I
> don't see anything in either "env" file (my local or
the global).
It's
> possible that it was fixed by a patch from Cadence. I
am running
"15.1
> (3/23/2004) s016 (v15-1-31S) i86". If you are paying
for maintenance,
check
> with Cadence.
>
> Good luck,
>
> Gary E. MacIndoe
> PCB Design Engineer
> Advanced Micro Devices, Inc.
> Longmont, Colorado
>
>
> -----Original Message-----
> From: Tony Stanislao
[mailto:stanislao_t@xxxxxxxxxxxx]
> Sent: Thursday, June 24, 2004 11:34 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Routing in Ver 15.1
>
>
> Hey Guys,
>
>
>
> Me and another designer here at work just switched
over to Ver 15.1
about
> 2 months ago. We both really like the new features but
notice that the
> routing is kind of narley. It does not have that
smooth easy routing
feel
> that was in V14. Has anyone else experienced this? Is
there a switch
to set
> to get it to route like V14? I can't route as fast.
The routing
doesn't seem
> to go where I want it to go. I find myself routing and
then fixing it.
Any
> suggestions would be greatly appreciated.
>
>
>
>
>
> Tony Stanislao, Senior PCB Design Engineer
> Pannaway Technologies | v: 603.766.5129| e:
stanislao_t@xxxxxxxxxxxx
>
> =========================================
>
>
>
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or
unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to
icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
