[PCB_FORUM] Re: negative text in positive plane
- From: "Andrew Noonan" <andrew@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 20 Sep 2004 12:35:15 -0700
A couple of details I missed...
1.) Import and place at x0,y0. This will put the text right where you
placed it originally.
2.) Make sure the text has the desired line width before outputting,
otherwise it's the default in the artwork control form.
Andrew
-----Original Message-----
From: Andrew Noonan
Sent: Monday, September 20, 2004 12:22 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: negative text in positive plane
Patrick,
Try creating the text on a new subclass (something unique, that no other
entities are on), and create the text in the position you want it.
Create and artwork control file to output that text only.
Read in the artwork file to the etch layer you want it. It comes in as
lines.
Edit the shape and void elements, lines only.
Delete the lines after filling the shape.
Voila.
Pic attached as example.
Andrew
-----Original Message-----
From: westfeldt [mailto:westfeldt_nbcd@xxxxxxxxx]
Sent: Monday, September 20, 2004 9:23 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] negative text in positive plane
How do you do negative text in a positive plane, so that all you see are
the negative letters?
Patrick Westfeldt, Jr.
North Boulder Circuit Design
westfeldt_nbcd@xxxxxxxxx
720-406-0887
c 720-272-5822
Other related posts:
