[PCB_FORUM] Re: "include backdrill" command/property missing?
- From: "Thurlow DeHorsey" <tdehorsey@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 29 Jan 2008 12:25:40 -0500
Do you have PCB DESIGN SUITE XL series XL ? If not, no backdrill
function.
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxx
Sent: Tuesday, January 29, 2008 11:49 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: "include backdrill" command/property missing?
Are you in Allegro "Expert"?
--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
http://www.tektronix.com <http://www.tektronix.com/>
http://www.pcb-designer.com <http://www.pcb-designer.com/>
"Off-Grid and Proud of it!"
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma
Kemp-Bresett
Sent: Tuesday, January 29, 2008 08:46
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] "include backdrill" command/property
missing?
Hello everyone,
We are trying to use the "new" backdrill feature in 15.7 and
have found that when we get to the nc drill the checkbox for "include
backdrill" is not there. It isn't just grayed out, its not there at all,
but there is a space for it....We checked version 16.0 and found the
same issue. All other backdrill commands/options appear to be there just
not that one. Do we have to have expert or something else to get that or
are we not doing something during prep that might enable it?
Thanks in advance,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying
documents contain information that is confidential, privileged or exempt
from disclosure under applicable law and is intended for the exclusive
use of the addressee. This information is private and protected by law.
If you are not the intended recipient, or have received this email in
error, you are hereby notified that any disclosure, copying,
distribution or use of the contents of this document in any manner is
strictly prohibited.
Other related posts:
