[PCB_FORUM] Re: cross probing
- From: Eric Hufstedler <ehufstedler@xxxxxxxxxxxxxxx>
- To: "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 21 Jun 2004 10:59:00 -0700
> You must also enable "intertool communication" in Capture CIS
> under options > preferences > Miscellaneous tab.
>
> Also it appears that the .dsn file and the .brd file have to
> be in the same directory.
I've never needed them in the same directory, but that may be the case if
you don't stick to the default of keeping the brd file in ./allegro/
Another problem i have had before was that if you do have intertool on, and
do a find on parts like caps where there are a bunch, it can bring capture
to a grinding halt because as it finds each one, it selects it in allegro.
For some reason, once it hits the 43rd (or 23rd or something like that)
part, it gets really slow. At least this was the case in 14.x.
eric
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
