[PCB_FORUM] Re: Uprev Designs 13.6 to 15.5
- From: george.h.patrick@xxxxxxxxxxxxxx
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 2 Nov 2005 08:58:41 -0800
Stephen:
We have found it more cost effective to delay uprev until it is actually
needed.
--
George Patrick
Tektronix, Inc.
Central Engineering, Engineering Design Services
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax) <http://www.tektronix.com/>
http://www.tektronix.com <http://www.pcb-designer.com/>
http://www.pcb-designer.com
It's my opinion, not Tektronix'
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mariani, Stephen
Sent: Wednesday, November 02, 2005 05:44
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Uprev Designs 13.6 to 15.5
Hello,
I will be taking on the task of up-reving all designs at our company from
13.6, 14.x, 15.x to current 15.5
I would like to know if anyone has done this in the past and if there is
something I need to look out for.
I do understand that the rules have changed from 13.6 to 14.x to 15.x and
the way we decided handle that is to just up-rev everything and as we respin
our designs we will update the rules. Is this a preferred process?
Thanks,
Steve
Stephen Mariani
Mercury Computer Systems, Inc.
199 Riverneck Road
Chelmsford, MA 01824
Phone: 978-967-1855
Cell Phone: 978-761-4101
Fax: 978-244-0520
Email: mailto:smariani@xxxxxx <blocked::mailto:smariani@xxxxxx>
Other related posts:
