[PCB_FORUM] Re: Shorting two or more nets together
- From: Gerry Meier <gerry.meier@xxxxxxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 9 Jan 2012 23:00:17 +0000
The net short information (XY's)will be in the IPC-356 netlist comment section
"Unless" to attach it to a shape. I do not attach it to shapes.
Gerry Meier, Sr. PCB Designer
Freedom CAD Services. Inc
Voice: (256) 715-1424
Email:gerry.meier@xxxxxxxxxxxxxx
Skype: rgmeier3
visit us at http://www.freedomcad.com<http://www.freedomcad.com/>
P Think Green only print as needed.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Monday, January 09, 2012 4:47 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Shorting two or more nets together
Hey Dennis,
You can put the "Net_Short" property on a pin, via or shape with the Value
field as "[net1]:[net2]" (I think three nets would be "[net1]:[net2]:[net3]").
I can't remember for sure, but you may want to run a Database Check afterwards.
Also, I would suggest including a Net Short document along with the Fab files
in order to avoid the inevitable phone call/e-mail.
As far as the schematic is concerned, I'm not sure. But I would think at least
a Note would be in order.
Regards,
Gary MacIndoe
Senior PCB Design Engineer
EbD R&D Hardware
Surgical Solutions Group
Covidien
Boulder, CO 80301
From:
icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx>
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]<mailto:[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]>
On Behalf Of Carrow, Dennis
Sent: Monday, January 09, 2012 3:27 PM
To: 'icu-pcb-forum@xxxxxxxxxxxxx'
Subject: [PCB_FORUM] Shorting two or more nets together
Hi Everyone,
Can I ask how to properly short two or more grounds at a common
point using Cadence Allegro 16.X and Design Entry HDL? Thanks for any and all
ideas! DC
Other related posts:
- » [PCB_FORUM] Shorting two or more nets together- Carrow, Dennis
- » [PCB_FORUM] Re: Shorting two or more nets together- Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- Macindoe, Gary
- » [PCB_FORUM] Re: Shorting two or more nets together - Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- Macindoe, Gary
- » [PCB_FORUM] Re: Shorting two or more nets together- Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- Carrow, Dennis
- » [PCB_FORUM] Re: Shorting two or more nets together- Shaw, Christopher
- » [PCB_FORUM] Re: Shorting two or more nets together- Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- Jerry Grzenia
- » [PCB_FORUM] Re: Shorting two or more nets together- Shaw, Christopher
- » [PCB_FORUM] Re: Shorting two or more nets together- Macindoe, Gary
- » [PCB_FORUM] Re: Shorting two or more nets together- Carrow, Dennis
- » [PCB_FORUM] Re: Shorting two or more nets together- Macindoe, Gary
- » [PCB_FORUM] Re: Shorting two or more nets together- Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- TEYSSIER Jean-Charles
- » [PCB_FORUM] Re: Shorting two or more nets together- Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- Macindoe, Gary
- » [PCB_FORUM] Re: Shorting two or more nets together- Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- Macindoe, Gary
- » [PCB_FORUM] Re: Shorting two or more nets together- Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- Macindoe, Gary
- » [PCB_FORUM] Re: Shorting two or more nets together- Gerry Meier
- » [PCB_FORUM] Re: Shorting two or more nets together- Carrow, Dennis
- » [PCB_FORUM] Re: Shorting two or more nets together- Daniel So
- » [PCB_FORUM] Re: Shorting two or more nets together- Oscar Migs