[PCB_FORUM] Re: Scripts with Free Viewer (NET_SPACING_TYPE)
- From: Dave Seymour <dseymour@xxxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 13 Jul 2010 07:40:44 -0700
Mark,
I'm going to assume you mean net property Spacing_Constraint_Set,
Highlight > Nets (checked in find filter) > Find by Name = Property > More...
Will bring up all net properties in the database.
Scroll to the property with the value one is looking for.
There is a screen capture below, I'm not sure the forum with pass the graphic.
Email me directly if not.
Hope this helps
Dave
[cid:image001.jpg@01CB2277.D91A1950]
Dave Seymour
Ixia
www.ixiacom.com<http://www.ixiacom.com>
919.267.4840
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Tuesday, July 13, 2010 10:21 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Scripts with Free Viewer (NET_SPACING_TYPE)
Mark,
Last week Dave Seymour replied that the 16.3 Free Viewer supports setting grids
(Setup > Design Parameters > Display > Grids).
Sorry I can't help you with the highlight NET_SPACING_GROUPS issue, I haven't
used the Free Viewer much (just the DEs for review).
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
Sent: Tuesday, July 13, 2010 4:56 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Scripts with Free Viewer (NET_SPACING_TYPE)
Sorry Gary, was on vacation last week.
I do not have a grid script set for the viewer. Therefore have not experienced
a crash.
Is there anyone out there that uses the viewer to highlight NET_SPACING_GROUPS?
I see in 16.3, they are no longer a net property...only a member of a group
which I can not find in the filter to highlight.
Regards,
Mark
Macindoe, Gary wrote:
Hey guys,
My scripts for different views (layers on/off), setting pads filled/unfilled
etc. are working fine in the Free Viewer. But, my scripts for changing the grid
cause the Free Viewer to crash.
Anyone know how to get grid setting scripts to work with the Free Viewer?
TIA!
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R & D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com<http://www.covidien.com>
Other related posts:
