I don't. yet. I just needed to be prepared to say "Yes, there is a process for translating a Mentor layout into Allegro". Now I just have to research the exact method, parameters, and limitations. Jim S. Wages / Independent SR. PCB Layout Designer: (919) 484-2963 -----Original Message----- From: Deac Descoteaux [mailto:deac@xxxxxxx] Sent: Wednesday, June 30, 2004 2:44 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: ] Re: Mentor to Allegro translation Hi Jim! Why do you need to go from Mentor to Allegro? Deac -----Original Message----- From: J Wages [mailto:jwages@xxxxxxxxx] Sent: Wednesday, June 30, 2004 4:41 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] ] Re: Mentor to Allegro translation I want to thank everyone that responded to my request about Mentor to Allegro translation. The information I received has been very valuable. My question was primarily posed to get some information on where to begin to research and to verify that there is actually a method to translate Mentor into Allegro. Once again, thanks for all of your help.. Jim S. Wages / Independent SR. PCB Layout Designer: (919) 484-2963