[PCB_FORUM] Re: Project Library (as opposed to Standard Library)
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 22 Aug 2013 14:37:10 +0000
Thanks for the reply Jean-Charles. What is a .cpm file? We use Allegro with
OrCAD Capture, with our libraries managed with CIP/CIS. Maybe this .cpm file is
associated with Concept.
Regards,
Gary MacIndoe
Senior PCB Design Engineer
EbD R&D Hardware
Surgical Solutions Group
Covidien
5920 Longbow Drive
M/S A20
Boulder, CO 80301
303.476.7458
www.covidien.com
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of JCharles TEYSSIER
Sent: Thursday, August 22, 2013 8:30 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Project Library (as opposed to Standard Library)
Hi Garry,
all my projects use standard structure of cadence with a .cpm file.
In path section of setup, you have a check "cpm file". If enable, then path is
stored in the.cpm of the roject so it cans be different of others.
Jean-Charles
Macindoe, Gary a écrit :
>
> Hey guy/gals,
>
> How do you set up for a project (more than one PCB design) that will
> use separate library symbols, as opposed to the standard library used
> for all other PCB designs?
>
> Thanks for any help.
>
> Regards,
>
> Gary MacIndoe
>
> Senior PCB Design Engineer
>
> EbD R&D Hardware
>
> Surgical Solutions Group
>
> Covidien
>
> Boulder, CO
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
