Yep, I've had "JOBlib" as the first place to look in my env file for years. Guess I'll stick with this method (and copy the contents of JOBlib for each design). Regards, Gary MacIndoe Senior PCB Design Engineer EbD R&D Hardware Surgical Solutions Group Covidien 5920 Longbow Drive M/S A20 Boulder, CO 80301 303.476.7458 www.covidien.com -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of JCharles TEYSSIER Sent: Thursday, August 22, 2013 9:08 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Project Library (as opposed to Standard Library) So, just add a local path to your env file. Exemple: ./locallib Jean-Charles Macindoe, Gary a écrit : > Ok, thanks. I'm leaning towards just using a local library under each design. > My standard name is "JOBlib", which is first in all of my env paths. > > Regards, > > Gary MacIndoe > Senior PCB Design Engineer > EbD R&D Hardware > Surgical Solutions Group > Covidien > 5920 Longbow Drive > M/S A20 > Boulder, CO 80301 > > 303.476.7458 > www.covidien.com > > > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of JCharles > TEYSSIER > Sent: Thursday, August 22, 2013 9:00 AM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Project Library (as opposed to Standard > Library) > > Yes it is. > But it can used in orcad flow: i do it (i have more capture schematics > than concept schematic) > > All my projects use a concet flow with a cpm file. In this flow, you MUST > lauch allegro with projecmanager tool: if not, setup is not read. > > Be carreful with using pcbenv like Richard tell: it is not only for one > project but for all user's project. > Somme collegues have use this method and have had problems with others > projects... > > Jean-Charles > > Macindoe, Gary a écrit : >> Thanks for the reply Jean-Charles. What is a .cpm file? We use Allegro with >> OrCAD Capture, with our libraries managed with CIP/CIS. Maybe this .cpm file >> is associated with Concept. >> >> Regards, >> >> Gary MacIndoe >> Senior PCB Design Engineer >> EbD R&D Hardware >> Surgical Solutions Group >> Covidien >> 5920 Longbow Drive >> M/S A20 >> Boulder, CO 80301 >> >> 303.476.7458 >> www.covidien.com >> >> -----Original Message----- >> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx >> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of JCharles >> TEYSSIER >> Sent: Thursday, August 22, 2013 8:30 AM >> To: icu-pcb-forum@xxxxxxxxxxxxx >> Subject: [PCB_FORUM] Re: Project Library (as opposed to Standard >> Library) >> >> Hi Garry, >> >> all my projects use standard structure of cadence with a .cpm file. >> In path section of setup, you have a check "cpm file". If enable, then path >> is stored in the.cpm of the roject so it cans be different of others. >> >> Jean-Charles >> Macindoe, Gary a écrit : >>> Hey guy/gals, >>> >>> How do you set up for a project (more than one PCB design) that will >>> use separate library symbols, as opposed to the standard library >>> used for all other PCB designs? >>> >>> Thanks for any help. >>> >>> Regards, >>> >>> Gary MacIndoe >>> >>> Senior PCB Design Engineer >>> >>> EbD R&D Hardware >>> >>> Surgical Solutions Group >>> >>> Covidien >>> >>> Boulder, CO >>> >> ----------------------------------------------------------- >> To subscribe/unsubscribe: >> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx >> with a subject of subscribe or unsubscribe >> >> To view the archives of this list go to >> //www.freelists.org/archives/icu-pcb-forum/ >> >> Problems or Questions: >> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx >> ----------------------------------------------------------- >> ----------------------------------------------------------- >> To subscribe/unsubscribe: >> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx >> with a subject of subscribe or unsubscribe >> >> To view the archives of this list go to >> //www.freelists.org/archives/icu-pcb-forum/ >> >> Problems or Questions: >> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx >> ----------------------------------------------------------- >> >> > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- > > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------